● How to connect panel
1. Peer double-sided tape off.
2. Stick double-sided tape to the panel (Pay attention to direction of
3. Use M9nut, toothed lock washer and washer to tighten panel and
4. M9 nut tightening torque shall be up to 2N.m.
5. Use double-sided tape under clean condition.
1. Panel thickness shall be up to 2mm(to use adapter)
2. Panel thickness shall be up to 4mm(without adapter)
● Mounting hole dimensions
1. Make φ9.2 dimensions hole at the panel(to use adapter)
2. Check out left example to use without adapter